JLAB JBuDS Air Executive Touch Controls Are Not Working?
JLAB JBuDS air executive earbuds are one of the popular choices in the wireless earbuds market. They offer a convenient, immersive listening experience with sleek design and touch controls. However, some users have reported issues with touch controls not working.
This is a common issue with earbuds that use touch controls and can be frustrating when you are trying to navigate through your music or answer a phone call.
This blog post will provide troubleshooting tips to help fix touch controls not working on your JLAB JBuDS air executive earbuds.
Possible reasons for touch controls not working
Before we jump into troubleshooting tips, it’s important to understand the possible reasons why touch controls may not be working. The cause of the issue can vary depending on the situation, but here are some of the common reasons why touch controls may not work:
1. Software issue
If you recently updated your earbuds’ firmware or paired them with a new device, a software issue may prevent touch controls from working properly.
2. Connectivity problem
If interference from other wireless devices or the distance between your earbuds and the device is too far, it may result in connectivity issues affecting touch controls.
3. Earbud malfunction
One or both of your earbuds may malfunction, which can prevent touch controls from working as intended.
Troubleshooting tips
Now that we have identified the possible causes of touch controls not working let’s dive into some troubleshooting tips to fix the issue. Follow these steps until you find the solution that works for you:
1. Reset your earbuds
Sometimes, a simple reset can solve the problem. To reset your JLAB JBuDS air executive earbuds, place them in the charging case and hold down the button on the back for at least 20 seconds until the LED lights start flashing. This will reset your earbuds and clear any software issues that may be causing touch controls not to work.
2. Repair your earbuds
If you recently paired your earbuds with a new device, it’s possible that the pairing process needed to be completed correctly, resulting in the touch controls not working. To repair your earbuds, put them back in the charging case and make sure they are fully charged. Then, delete the current pairing on your device and start the pairing process again.
3. Check the connectivity
If touch controls are still not working, ensure your earbuds are connected to your device. The earbuds may sometimes have trouble maintaining a stable connection, which can affect touch controls. Try moving closer to your device and ensuring no interference from other wireless devices in the area.
4. Check touch control settings
Make sure the touch control settings on your device are correctly configured. JLAB JBuDS air executive earbuds offer customizable touch controls, and the settings may have been changed accidentally. Check the manual for your earbuds’ correct touch control settings and adjust them if necessary.
5. Clean your earbuds
Dirt, earwax, and other debris can accumulate on your earbuds’ touch controls, which can affect their sensitivity. Use a dry cloth or earbud cleaning tool to clean the touch controls gently.
6. Check for earbud malfunction
If none of the above solutions works, it’s possible that one or both of your earbuds are malfunctioning. Check for any physical damage or signs of wear and tear. If your earbuds are still under warranty, contact JLAB customer support for assistance. They can help you diagnose the issue and provide a solution.
FAQs’
How do I reset my JBUD Air executive?
To reset your JBUD Air executive earbuds, place them in the charging case and hold down the button on the back for at least 20 seconds until the LED lights start flashing. This will reset your earbuds and clear any software issues causing problems.
How do I use JLab go air controls?
To use JLab Go Air controls, tap on the touchpad on the side of the earbuds. A single tap will play/pause your music or answer/end a phone call. Double-tap will skip to the next track, and triple-tap will return to the previous track.
How do I control JBuds air?
To control JBuds Air, use the touch controls on the earbuds. A single tap will play/pause your music or answer/end a phone call. Double-tap will skip to the next track, and triple-tap will return to the previous track. You can also activate Siri or Google Assistant by pressing and holding the touchpad.
How do I fix one JLab earbud that is not working?
If one JLab earbud is not working, try resetting your earbuds, repairing them with your device, cleaning them, and checking for any physical damage. If none of these solutions works, contact JLab customer support for further assistance.
How do I update my JLab earbuds?
To update your JLab earbuds, ensure they are fully charged and connected to your device. Then, download the JLab Audio app from the App Store or Google Play Store. Open the app, and it will prompt you to update your earbuds if an update is available.
How do I factory reset my earbuds?
To factory reset your earbuds, follow the instructions specific to your model. For example, for JLab JBuds Air, place both earbuds into the charging case and hold the button on the back for at least 20 seconds until the LED lights start flashing.
How do I control my JBL earbuds?
To control JBL earbuds, use the touch controls on the earbuds. A single tap will play/pause your music or answer/end a phone call. Double-tap will skip to the next track, and triple-tap will return to the previous track. You can also activate your phone’s voice assistant by pressing and holding the touchpad.
Is there an app for JBuds Air?
Yes, a JLab Audio app is available for both iOS and Android devices that allows you to customize your JBuds Air settings, update firmware, and access user manuals and support.
Do JLab earbuds have an app?
Yes, JLab Audio has a dedicated app for both iOS and Android devices. The app allows you to customize your earbuds’ settings, update firmware, and access user manuals and support.
Conclusion
Touch controls not working is a common issue that can be frustrating when using your JLAB JBuDS air executive earbuds. However, by following these troubleshooting tips, you can solve the problem and continue enjoying your wireless listening experience.
Remember to reset your earbuds, repair them, check connectivity, adjust touch control settings, clean them, and check for earbuds malfunction. If none of these solutions works, contact JLAB customer support for further assistance.
Taking care of your electronic devices can prevent issues like touch controls not working from happening in the future. Keep your earbuds clean and store them properly in their charging case when not in use. We hope these troubleshooting tips have been helpful, and happy listening!
Additional resources: If you need more help troubleshooting touch controls not working on your JLAB JBuDS air executive earbuds, check out JLAB’s website and customer support page for additional resources. Remember that the blog post is not affiliated with JLAB, and the troubleshooting tips are based on personal experience and research.
Thanks For Visiting!
Related Articles:-
- JBL Endurance Peak Left Earbud Not Working?
- Skullcandy Indy ANC Left Earbud Not Working?
- Grind Fuel One Earbud Not Working?
- Beats Studio Buds Right Earbud Not Working
- Powerbeats Pro Left Earbud Not Working
- ONN True Wireless Earbuds One Side Not Working
- Pixel Buds Left Bud Not Working
- Jabra Elite 65t Left Or Right Earbud Not Working
- Jabra Elite 75t Left or Right Earbud Not Working
- Jabra Elite 85t Left or Right Earbud Not Working
