Sonos Soundbar is Not Working? – [Steal His Setups & Fix]

It might be unpleasant when a Sonos Soundbar is not working, but hope always exists. The Sonos Arc is a great all-in-one audio system if you want a basic surround sound kit and have a square home theater space.

Even if Sonos is responsible for some of the most fabulous multi-room loudspeakers on the market, it doesn’t guarantee you won’t experience any issues while utilizing them. There are several solutions, some of which may be implemented within minutes.

This article describes resolving some of the most common Sonos Soundbar Problems.

Why is My Sonos Soundbar Not Working?

Sonos functions through your home’s internet network, unlike most Bluetooth-connected speakers. Though Sonos is responsible for some of the industry’s finest multi-room speakers, it doesn’t guarantee that you won’t have any issues. If your Sonos Soundbar is not working, you may be experiencing any of the following cases:

• Problem with cables
• Internet connection issues
• Faulty remote controller
• Wrong setting with TV
• Problem with Netflix
• Router not connecting
• Faulty speakers

How To Fix The Sonos Soundbar Not Working?

Consider the following options if your Sonos soundbar is malfunctioning. You will generally be operating in no time.

Power Issues

Issues with the power source are apparent. This problem may appear in a variety of ways, so examine the following;

Breaker Box

1. Inspect the circuit breaker box for a tripped breaker. Do not depend solely on others.
2. It is usual for that circuit breaker to shift somewhat in its panel when it trips. In addition, a red line on the side of the tripped breaker may be seen.

• Turn the circuit breaker completely off and then back on. That ought to restore power.

1. If the circuit breaker keeps tripping, there may be a problem with the soundbar or anything else on the circuit. Unplug each appliance individually to see whether the breaker is continuing the trip.
2. If the circuit breaker keeps tripping, call an electrician.

Examine The Receptacle

Even though receptacles often have a lengthy lifespan, they sometimes fail. It might break the outlet in half, but the device you put into it could still function.

Plugging a light or other electrical item into the receptacle is the simplest method to test it. If it starts up, the trouble lies elsewhere. Get in touch with an electrician to swap out the plug if there’s no electricity.

Power Strip

In the majority of houses, power strips are fully used. There will be no unused slots, which may result in excessive energy loss. If you have a Sonos soundbar, you may skip the power strip and put it straight into an outlet. If it helps, the issue was likely caused by an overloaded power strip.

Check The Optical or HDMI Cable

It would be best if you appropriately linked the soundbar and TV through an optical cable or HDMI ARC connection. If you are using a visual connection, you should check whether the red light located next to the input on the Playbar or the Beam is illuminated. The wire connecting the TV and soundbar may be unplugged temporarily if needed.

Cords

All cables need to be in working order for the soundbar to function. Ensure no burn marks on the socket or cuts in the cable while checking electrical connections. The soundbar may also be affected by the use of other cables. With a faulty HDMI cable, the soundbar won’t operate.

Connectivity Issues

Connect Only One Speaker

It would be better if you only used Ethernet cables to connect one Sonos speaker to the router. It will link the remaining speakers through Wi-Fi. If you have many speakers connected to the network, disconnect all except the main speaker.

Change The Settings On Your TV

1. Open the settings menu on your tv.
2. Check the sound output settings and choose the correct audio output.
3. The Playbase requires an optical output, whereas the Beam may use either an optical output or an HDMI connector.
4. The outputs are typically labeled as “audio out HDMI,” “external speakers,” “optical out,” “audio out optical,”  and “HDMI out.”

Network Updates

Soundbar firmware upgrades, such as a new IP address, network name, or password, are required whenever the network changes. You must connect your Sonos soundbar to your home network to perform effectively. Do not use your guest network or a hotspot to operate the soundbar.

Remote Control

It might be remote if you have trouble powering your Sonos soundbar with it. Follow these steps.

1. Check for obstructions to the IR sensor
2. Approach the home theater product
3. Remove old batteries from the remote
4. Eliminate direct light sources
5. Separate Sonos and plasma television
6. Reduce interference with IR

Settings Issues

Check Your Netflix Configuration

Does Netflix streaming lack sound? You may fix this issue by;

1. Opening the sound options on Netflix
2. Selecting Dolby Digital Plus as the previous audio format,
3. Selecting Stereo as the new audio format.

The Beam and the Playbar do not support Dolby Digital Plus.

Check Your PS4 Settings

Does your PlayStation lack audio while streaming or playing Blu-rays? Go to the PS4’s settings menu.

1. Select “Sound and display.”
2. Click the “Settings video output” option.
3. Select the ‘Primary output port’ option.
4. Choose “HDMI OUT.” Set the audio format to ‘Bitstream (Dolby).’

Factory Reset

To do a hard reset on either a Play:1, Play:3, or Play:5 (generation 1), Connect: Amp, Connect, or Playbar:

1. Detach the power line from the wall outlet.
2. Reconnect the power cable to the wall outlet while holding the Play/Pause button.
3. Hold the button until an amber and white flashing light appears.
4. The Green coloured LED blink indicates that the factory reset has been successful.

To reset your Sonos One, Boost, Sub, Bridge, Playbase, Amp, Play:5 (generation 2), or Beam to factory settings:

1. Detach the power line from the wall outlet.
2. Connect by pressing and holding the button while reconnecting the power line to the wall
3. Keep pressing the button until a white and amber light begins flashing.
4. Once the hard reset has been completed, the indicator light will flicker Green.

Conclusion

The Arc from Sonos is the best soundbar you can buy if you want a simple solution that provides excellent surround sound. Sonos Soundbar not working? The perfect thing doesn’t mean it will not encounter any problems, so there would be so many faults Sonos soundbar may face, and the solutions are also available in this article.

Thanks For Visiting!

Related Articles:-

• Sling TV Is Not Working On Samsung TV?
• Ford F150 Radio Not Working?
• Samsung Watch On App Is Not Working?
• Express VPN Is Not Working On Netflix
• Noom App Not Working
• Jabra Elite 65t Left Or Right Earbud Not Working
• Peloton App Not Working On Firestick