When you spend thousands of dollars on a product, you expect it to work exceptionally well. So, when the Kenmore ice maker stops making ice as it is supposed to, it not only causes frustration but also brings in a lot of worry.
There are many reasons that could be the cause of an ice maker not performing well. Before you start to panic and call the company customer service, read the tips that have been shared in the article below.
Some of the most common issues with the Kenmore ice maker, along with solutions to them, are written below. So, read them and then figure out which is the cause behind your Kenmore ice maker not working.
Kenmore Ice Maker Not Working
Why is My Kenmore Ice Maker Not Working?
Low Water Pressure
Like every ice maker, the Kenmore ice maker also requires a specific water pressure supplied to the dispenser. This helps in the production of the ice in the amount that the refrigerator is supposed to make. Therefore, when the water pressure is low, it could affect the ice maker’s performance.
Clogged And Old Water Filter
Ice makers have water filters that ensure that all the dirt and particles are removed from the water supplied to the dispenser. So, after a while, the water filters become dirty and clogged. This interrupts the water supply, which ruins the ice production.
Ice Maker Switch Turned Off
Ice makers come with their own power switch, which is present under the ice tray. The power switch needs to be turned on for the ice maker to start working. If the power switch is off, it will not work.
Faulty Door Switch
The other major cause behind the ice maker of Kenmore not working could be the faulty door switch. When the door is opened, the dispenser is turned off automatically, and it turns on when the door is closed. However, when the door switch is damaged and faulty, it causes the dispenser to remain off even with the door closed, which affects the ice maker’s performance.
How To Fix The Issues with the Ice Maker?
Check and Fix the Water Pressure
If your ice maker is not working, then first, you need to check the water pressure. If the pressure is low, connect the ice maker to a steady stream of water supply. This will fix the problem immediately.
Replace the Water Filter
If you notice that the water filter is clogged, then you need to remove the old one immediately and add a new one in its place. Make sure to install the new water filter properly; otherwise, it will also affect the job of the ice maker. Once it has been installed, turn the maker on, and in a while, it will begin to make ice.
Check the Ice Maker Power Switch
If the issue is not with the water filter or the water supply, then the third thing that you need to check is the power switch. Kenmore ice maker, like other brands’ ice makers, comes with a separate power switch. So, take out the ice tray and turn the switch on if it is powered off.
Fix and Replace the Door Switch
If none of these are the cause behind the ice maker not working, then you need to check the door switch. If you notice that the dispenser does not turn on, even after shutting the door close, then you need to change the door switch.
What causes an ice maker to stop working?
There could be many reasons that can halt the functioning of an ice maker. Wrong freezer temperature, clogged water filter, and faulty air pressure are the leading causes behind why an ice maker stops working and making ice.
How long does it take for an ice maker to make ice?
Kenmore refrigerators are among the best ones in the market. So, if you have connected the ice maker to a steady water supply and set the temperature within the ideal range, it will take the ice maker approximately 90 minutes to make ice.
If your Kenmore ice maker is not working properly and making a sufficient amount of ice, then a wide number of reasons could be the cause of it. You’re in luck as not only the reasons but their solutions are also present in the article above. So, I hope you are able to fix your issue with the above-stated tips.
Thanks For Visiting!